Best Circular Saw Blade

RANK
#1

Overall Rating

based on 5261 reviews

9.6

Manufacturer: ‎Dewalt

Item Weight: ‎3 pounds

Product Dimensions: ‎13.75 x 13.75 x 0.19 inches

Is Discontinued By Manufacturer: ‎No

Color: ‎Metallic

Material: ‎Carbide

RANK
#2

Overall Rating

based on 3384 reviews

9.6

Manufacturer: ‎Dewalt

Item Weight: ‎2.64 pounds

Product Dimensions: ‎17 x 13.56 x 0.63 inches

Is Discontinued By Manufacturer: ‎No

Material: ‎Carbide

Batteries Included: ‎No

RANK
#3

Overall Rating

based on 2456 reviews

9.6

Manufacturer: ‎CRAFTSMAN

Item Weight: ‎3.11 pounds

Material: ‎Carbide

Batteries Required: ‎No

RANK
#4

Overall Rating

based on 2297 reviews

9.0

Manufacturer: ‎Evolution Power Tools

Item Weight: ‎1 pounds

Product Dimensions: ‎14 x 14 x 1 inches

Is Discontinued By Manufacturer: ‎No

Color: ‎Blue

Material: ‎Other

RANK
#5

Overall Rating

based on 2184 reviews

9.2

Manufacturer: ‎PORTER-CABLE

Item Weight: ‎2.72 ounces

Product Dimensions: ‎6.75 x 5.5 x 0.13 inches

Is Discontinued By Manufacturer: ‎No

Color: ‎Original Version

Material: ‎Plywood

RANK
#6

Overall Rating

based on 1958 reviews

9.8

Manufacturer: ‎Freud

Item Weight: ‎2.5 pounds

Product Dimensions: ‎1 x 14 x 16 inches

Is Discontinued By Manufacturer: ‎No

Color: ‎Red

Material: ‎Carbide

RANK
#7

Overall Rating

based on 1795 reviews

9.6

Manufacturer: ‎Diablo

Item Weight: ‎4.8 ounces

Product Dimensions: ‎7.25 x 7.25 x 0.31 inches

Is Discontinued By Manufacturer: ‎No

Material: ‎Carbide

Batteries Included: ‎No

RANK
#9

Overall Rating

based on 1736 reviews

9.6

Is Discontinued By Manufacturer:

Product Dimensions:

Manufacturer:

RANK
#10

Overall Rating

based on 1730 reviews

9.6

Manufacturer: ‎Diablo

Item Weight: ‎1.7 pounds

Product Dimensions: ‎13.7 x 11.7 x 0.3 inches

Is Discontinued By Manufacturer: ‎No

Color: ‎Multi

Material: ‎Carbide

FAQs: Best Circular Saw Blade

What is the most common blade when using a circular saw?


Carbide-tipped. These are the most common types of circular saw blades. They consist of a steel disc and carbide-tipped teeth at the edge. These blades are used to cut through wood. However, specially-designed carbide blades can cut through light gauge metal.

How much of the circular saw blade should be past the material being cut?


Never place the tool in your hand without insulating the grasping surfaces. Limit the blade depth to no more than 1/8 inch. to 1/4 inch. The material to be cut should not exceed 1/4 in. Before you contact the workpiece, let the saw reach maximum speed.

Which type of circular saw blade stays sharp the longest?


From FluencyFrom FluencyTCT Blades can be used on circular saws as premium blades. They are more durable and last for a longer period of time. These blades have the added benefit of being able to replace or lose their tips. They can also be sharpened, giving you the best value and longest-lasting blade.

What are circular saw blades made of?


Steel springs are commonly known as spring steel. They can be made from different types of steel like medium carbon steel, low alloy manganese or high carbon steel. High carbon steel is used to make circular saw blades.

How do I choose a circular saw blade?


Blades with more teeth are likely to have a smoother and finer cut, whereas those with fewer teeth will be less precise. A blade with fewer teeth will result in a faster cut and a lower cost. A 24-tooth general-purpose blade is enough for most construction jobs.

Is more teeth on a circular saw blade better?


The speed, type, and finish of the cut are determined by the number of teeth on your blade. A blade with fewer teeth cuts faster, while a blade with more teeth produces a finer result.

What can you do with a circular saw blade?


Recycling old circular saw blades is possible by taking them to a local recycling center. You can recycle circular saw blades made from steel if you have the right place.

How are circular saw blades manufactured?


To make circular saw blades, the first step is to cut the saw's shape using a powerful C02 laser. A CAD program is used to design the shape and features of the saw. The laser can then generate the cutting path.

What steel is circular saw blade?


Modern, high-quality circular saw blades feature tungsten carbide teeth that are brazed to some type of carbon steel alloy blade. They don't use the best quality tool steels, as they don't need to be. All the work is done by the carbide tooth.

Why does circular saw Buck?


Kickback is when the saw blade becomes stuck in the wood, and the saw is driven back at you. This can be prevented by making sure that your blade does not bind into the wood.

Why does my circular saw keeps binding?


Failure to set the blade properly can cause a circular saw to bind. Too deep blades pose a risk because they expose more blade surface while cutting. Kickback and binding are inevitable when the saw is set too deep.

Why does my circular saw blade stop spinning?


Your workpiece may be pinching your blade, which is the most common reason why your circular saw blade won't spin. Your circular saw blade may also stop spinning if it isn't too deep, if your workpiece is too short (Very Common), or if your clutch bolt is loose, a dead battery, a problem with the power cable, or a motor problem.

Which saw blade makes the smoothest cut?


The 44-tooth blade (left) makes a smooth cut. It is used for trimming carpentry and cabinet building. The coarser, 24-tooth blade (right) cuts faster and is used to do rough carpentry work.

Are all circular saw blades the same?


Each material is different, so the blades of a circular saw are designed to be used with different materials. A single circular saw might require different blades, which are not universal or interchangeable.

What is the best general purpose circular saw blade?


From FluencyFrom FluencyFrom FluencyView the current price From Fluency

What size blade does a circular saw take?


7-1/4 inches. The most common blade size is 7-1/4 inches. A majority of saws that have a blade capacity of 6 inches or greater can cut through 2-inch dimensional wood at a 45-degree angle in one pass. A 5-3/32-inch saw can be used to cut through 2-inch dimensional lumber at 90 degrees. However, it will require two passes at 45 degrees.

Why are circular saw blades on the right?


The blade-left position for right-handed users makes it easy to see the sight/cut line with a simple one-handed operation. Many tradesmen use the left hand to stabilize or hold the material while using the right hand to operate the saw.

What can you cut with a TCT blade?


TCT saw blades were specifically made for cutting metal tubing, tubes, and pipes.

How do you cut a plywood with a circular saw without splintering?


Place the top side, which is the one that will be visible when the door is hung, face down. With a sharp utility knife, score along the cut line. The wood fibers will now be broken off at the score line. This will leave a smooth, splinter-free cut.

How many teeth does a finishing blade have?


Here's a list of common tooth uses and the different tooth counts: 16-24 Teeth: Demonstration/Framing. All-Purpose cutting: 32-50 teeth. 60-80 Teeth: Finish Grade.

Can circular saw blades be recycled?


It is likely that you will be pleased to learn that in most cases, the answer is yes. Most steel blades can be recycled with other metal recyclables like cans. They can be placed in the blue bin along with regular trash and recycling pickups by many cities.

How do you paint an old saw blade?


The saw blade should be thoroughly washed and dried. Let the metal primer dry. Before you begin painting, apply a base coat of acrylic or enamel paint.

How are carbide blades made?


A flexible spring steel is used as the backing for carbide-tipped blades. The backing material is machined to create teeth-pockets. After the pockets have been milled, the carbide tip can be brazed into them and then ground. The carbide tip can withstand more heat and is stronger.

Are circular saw blades Hardenable?


This is the whole process of hardening circular saw blades. Most blades have at least hardened teeth. The best circular saw blades are fully hardened. Bi-metal blades can also be found with a hardened outer rim and a tough body.

*Disclaimer: Power Tools Planet is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking. (20871)